[Paraview] visualizing subdomain interfaces (boundaries) PV 3.10.0

Stephen Wornom stephen.wornom at inria.fr
Fri Sep 14 11:21:22 EDT 2012


Andy Bauer wrote:
> You may need to upgrade to 3.14.1 then. I'm not sure when it was 
> introduced to paraview.
I searched for "id scalars" in PV 3.10.0 and PV found "Processor id 
scalars." Clicked on it.
How do I see the partition interfaces using "Threshold"?

Stephen
>
> On Fri, Sep 14, 2012 at 11:10 AM, Stephen Wornom 
> <stephen.wornom at inria.fr <mailto:stephen.wornom at inria.fr>> wrote:
>
>     Andy Bauer wrote:
>
>         That filter is only available if you're running pvserver in
>         parallel. I believe it should be in 3.10.
>
>     I don't see "id scalars" under filters. I am running in parallel.
>     I can try PV 3.10.1
>     Stephen
>
>
>         Andy
>
>         On Fri, Sep 14, 2012 at 10:54 AM, Stephen Wornom
>         <stephen.wornom at inria.fr <mailto:stephen.wornom at inria.fr>
>         <mailto:stephen.wornom at inria.fr
>         <mailto:stephen.wornom at inria.fr>>> wrote:
>
>             Andy Bauer wrote:
>
>                 If you're working in parallel with your original grid
>                 partition you can try the process id scalars
>
>             Thanks Andy,
>             I am using PV 3.10.0
>             I don't see the "process id scalars." Where do I find it?
>             Stephen
>
>                 and then the threshold filter to separate the
>         different domain
>                 partitions. If you're working in serial you may be
>         able to use
>                 the extract surface filter to see the interface
>         between the
>                 partitions from the files.
>
>                 Andy
>
>                 On Thu, Sep 13, 2012 at 4:28 AM, Stephen Wornom
>                 <stephen.wornom at inria.fr
>         <mailto:stephen.wornom at inria.fr>
>         <mailto:stephen.wornom at inria.fr <mailto:stephen.wornom at inria.fr>>
>                 <mailto:stephen.wornom at inria.fr
>         <mailto:stephen.wornom at inria.fr>
>                 <mailto:stephen.wornom at inria.fr
>         <mailto:stephen.wornom at inria.fr>>>> wrote:
>
>                     I have parallel unstructured data .pvd .pvtu and
>         vtu data
>                 for each
>                     subdomain.
>
>                     Is there an easy way to see the interfaces? I have
>         a pressure
>                     abnormality and I would like to see if it ls
>         located on a
>                 boundary
>                     between two domains.
>                     Thanks,
>                     Stephen
>
>                     -- stephen.wornom at inria.fr
>         <mailto:stephen.wornom at inria.fr>
>                 <mailto:stephen.wornom at inria.fr
>         <mailto:stephen.wornom at inria.fr>>
>                 <mailto:stephen.wornom at inria.fr
>         <mailto:stephen.wornom at inria.fr>
>         <mailto:stephen.wornom at inria.fr <mailto:stephen.wornom at inria.fr>>>
>                     2004 route des lucioles - BP93
>                     Sophia Antipolis
>                     06902 CEDEX
>
>                     Tel: 04 92 38 50 54
>                     Fax: 04 97 15 53 51
>
>
>                     _______________________________________________
>                     Powered by www.kitware.com
>         <http://www.kitware.com> <http://www.kitware.com>
>                 <http://www.kitware.com>
>
>                     Visit other Kitware open-source projects at
>         http://www.kitware.com/opensource/opensource.html
>
>                     Please keep messages on-topic and check the
>         ParaView Wiki at:
>         http://paraview.org/Wiki/ParaView
>
>                     Follow this link to subscribe/unsubscribe:
>         http://www.paraview.org/mailman/listinfo/paraview
>
>
>
>
>             -- stephen.wornom at inria.fr
>         <mailto:stephen.wornom at inria.fr>
>         <mailto:stephen.wornom at inria.fr <mailto:stephen.wornom at inria.fr>>
>             2004 route des lucioles - BP93
>             Sophia Antipolis
>             06902 CEDEX
>
>             Tel: 04 92 38 50 54
>             Fax: 04 97 15 53 51
>
>
>
>
>     -- 
>     stephen.wornom at inria.fr <mailto:stephen.wornom at inria.fr>
>     2004 route des lucioles - BP93
>     Sophia Antipolis
>     06902 CEDEX
>
>     Tel: 04 92 38 50 54
>     Fax: 04 97 15 53 51
>
>


-- 
stephen.wornom at inria.fr
2004 route des lucioles - BP93
Sophia Antipolis
06902 CEDEX
		
Tel: 04 92 38 50 54
Fax: 04 97 15 53 51

-------------- next part --------------
A non-text attachment was scrubbed...
Name: stephen_wornom.vcf
Type: text/x-vcard
Size: 160 bytes
Desc: not available
URL: <http://www.paraview.org/pipermail/paraview/attachments/20120914/4525d237/attachment-0001.vcf>


More information about the ParaView mailing list