[Paraview] Tecplot reader error

da remywendy at gmail.com
Fri Mar 5 19:28:20 EST 2010


Hi folks.

I ran into this problem recently with STRANDID/TIMESOLUTION as well. For my
files, they are automatically added even though there is no data for them.

 STRANDID=0, SOLUTIONTIME=0

A simple solution for me was to just eat up the token for them...

        if ( tok == "STRANDID" )
          {
          vtkErrorMacro( << this->FileName << "; Tecplot zone record
parameter "
                         << "'STRANDID' is currently unsupported." );
* **  this->Internal->GetNextToken();*
          }
        else
        if ( tok == "SOLUTIONTIME" )
          {
          vtkErrorMacro( << this->FileName << "; Tecplot zone record
parameter "
                         << "'SOLUTIONTIME' is currently unsupported." );
* **  this->Internal->GetNextToken();*
          }

and it'll just continue as if nothing was going on. Otherwise, the loop
exits the zone area and gives you a ton of errors.


On Wed, Nov 25, 2009 at 10:12 AM, Zhanping Liu <zhanping.liu at kitware.com>wrote:

> Hi Fred:
>
>     Is that convenient for me to have a copy of the whole tecplot file
> (including the actual zone data in addition to the zone title)? Then I will
> be glad to check the problem by removing the time-series tokens (STRANDID
> and TIMESOLUTION) first. There seem to be other tokens indicating some
> functionalities that the current simplified reader does not support yet.
>
>     Thanks.
>
>     -Zhanping
>
> On Wed, Nov 25, 2009 at 6:47 AM, Fred Fred <stan1313 at hotmail.fr> wrote:
>
>>
>> Actually this is not a time varying series but there are several zones:
>>
>>
>> ZONE T="domain1"
>>  STRANDID=0, SOLUTIONTIME=0
>>  I=43, J=45, K=5, ZONETYPE=Ordered
>>  DATAPACKING=BLOCK
>>  VARLOCATION=([4-12]=CELLCENTERED)
>>  AUXDATA CGNS.CGNSBase_t="Base#1"
>>  AUXDATA CGNS.Zone_t="domain1"
>>  DT=(DOUBLE DOUBLE DOUBLE DOUBLE DOUBLE DOUBLE DOUBLE DOUBLE DOUBLE DOUBLE
>> DOUBLE DOUBLE )
>>  4.352440754E-02 4.352440754E-02 4.352440754E-02 4.352440754E-02
>> 4.352440754E-02
>> [...]
>>  1.710705371E+01 1.603499243E+01
>> ZONE T="domain3"
>>  STRANDID=0, SOLUTIONTIME=0
>>  I=49, J=89, K=9, ZONETYPE=Ordered
>>
>>  DATAPACKING=BLOCK
>>  VARLOCATION=([4-12]=CELLCENTERED)
>>  AUXDATA CGNS.CGNSBase_t="Base#1"
>>  AUXDATA CGNS.Zone_t="domain3"
>>  DT=(DOUBLE DOUBLE DOUBLE DOUBLE DOUBLE DOUBLE DOUBLE DOUBLE DOUBLE DOUBLE
>> DOUBLE DOUBLE )
>>  -1.454322089E-02 -1.453761256E-02 -1.452607960E-02 -1.450552743E-02
>> -1.447481920E-02
>> [...]
>>
>> and always the same time value : STRANDID=0, SOLUTIONTIME=0
>> I tried to withdraw this line everywhere but I get another error:
>>
>>
>> ERROR: In /usr/local/ParaView3/VTK/IO/vtkTecplotReader.cxx, line 1714
>> vtkTecplotReader (0x25249ca0):
>> /Users/wifridlefer/Data/TM/Jalon2/CAS_MT2.dat: The record type
>> -1.988960529E-02 found in the file is unknown.
>>
>> Any idea?
>>
>>
>> ------------------------------
>> Date: Fri, 20 Nov 2009 11:55:55 -0500
>>
>> Subject: Re: [Paraview] Tecplot reader error
>> From: zhanping.liu at kitware.com
>> To: agagliardi at ara.co.uk
>> CC: stan1313 at hotmail.fr; paraview at paraview.org
>>
>>
>> Adriano:
>>
>>    You are correct.
>>
>>    This ad-hoc way works by means of vtkFileSeriesReader.cxx.
>>
>>    Thanks.
>>
>>    -Zhanping
>>
>> On Fri, Nov 20, 2009 at 11:48 AM, Adriano Gagliardi <agagliardi at ara.co.uk
>> > wrote:
>>
>>  Zhanping,
>>
>> This method will not allow you to use any of the time-dependent filters,
>> right (like FFT)?
>>
>> Adriano
>>
>> ===================================
>>
>> Adriano Gagliardi MEng PhD
>> Project Scientist
>> Computational Aerodynamics
>> Aircraft Research Association Ltd.
>> Manton Lane
>> Bedford
>>
>> Tel: 01234 32 4644
>> E-mail: agagliardi at ara.co.uk
>> Url: www.ara.co.uk
>>
>>
>>  ------------------------------
>> *From:* paraview-bounces at paraview.org [mailto:
>> paraview-bounces at paraview.org] *On Behalf Of *Zhanping Liu
>> *Sent:* 20 November 2009 16:35
>> *To:* Fred Fred
>> *Cc:* paraview at paraview.org
>> *Subject:* Re: [Paraview] Tecplot reader error
>>
>>    Fred:
>>
>>    The problem was actually caused by "STRANDID=0, SOLUTIONTIME=0".
>> Currently the Tecplot reader, a simplified version, does not support loading
>> time series data. If you really want load multiple time steps of data, you
>> need to remove these two tokens from the zone header(s). And you need put
>> each time step as an individual file, e.g., file000.tec, file001.tec, ...
>> and et al. Then you can select all of them by means of 'file*.tec' when
>> opening the file dialog. In this way, you will still be able to view the
>> dataset at multiple steps.
>>
>>    Sorry for the lack of time series data support and we are considering
>> if we need to add it.
>>
>>   Thanks.
>>
>>   -Zhanping
>>
>> On Fri, Nov 20, 2009 at 10:08 AM, Zhanping Liu <zhanping.liu at kitware.com>wrote:
>>
>> Fred:
>>
>>    I will fix it.
>>
>>   Thanks.
>>
>>   -Zhanping
>>
>>   On Fri, Nov 20, 2009 at 9:13 AM, Fred Fred <stan1313 at hotmail.fr> wrote:
>>
>>   I am not a tecplot file format specialist but I need to read such files
>> provided by other people.
>> The header of my file is as follow:
>>
>> TITLE     = "Translation of CGNS file elsAoutput.cgns"
>> VARIABLES = "CoordinateX"
>> "CoordinateY"
>> "CoordinateZ"
>> "TurbulentDissipation"
>> "Density"
>> "TurbulentDistance"
>> "TurbulentDistanceIndex"
>> "EnergyStagnationDensity"
>> "MomentumZ"
>> "MomentumY"
>> "MomentumX"
>> "TurbulentEnergyKineticDensity"
>> DATASETAUXDATA Common.DensityVar="5"
>> DATASETAUXDATA Common.StagnationEnergyVar="8"
>> DATASETAUXDATA Common.TurbulentDissipationRateVar="4"
>> DATASETAUXDATA Common.UVar="11"
>> DATASETAUXDATA Common.VectorVarsAreVelocity="FALSE"
>> DATASETAUXDATA Common.VVar="10"
>> DATASETAUXDATA Common.WVar="9"
>> ZONE T="domain1"
>>  STRANDID=0, SOLUTIONTIME=0
>>  I=43, J=45, K=5, ZONETYPE=Ordered
>>  DATAPACKING=BLOCK
>>  VARLOCATION=([4-12]=CELLCENTERED)
>>  AUXDATA CGNS.CGNSBase_t="Base#1"
>>  AUXDATA CGNS.Zone_t="domain1"
>>
>> I get this errors:
>>
>> ERROR: In /usr/local/ParaView3/VTK/IO/vtkTecplotReader.cxx, line 1714
>> vtkTecplotReader (0x25198950): /Data/dataset.dat: The record type
>> DATAPACKING found in the file is unknown.
>>
>>
>> ERROR: In /usr/local/ParaView3/VTK/IO/vtkTecplotReader.cxx, line 1714
>> vtkTecplotReader (0x25198950): /Data/dataset.dat: The record type BLOCK
>> found in the file is unknown.
>>
>>
>> ERROR: In /usr/local/ParaView3/VTK/IO/vtkTecplotReader.cxx, line 1714
>> vtkTecplotReader (0x25198950): /Data/dataset.dat: The record type
>> VARLOCATION found in the file is unknown.
>>
>>
>> ERROR: In /usr/local/ParaView3/VTK/IO/vtkTecplotReader.cxx, line 1714
>> vtkTecplotReader (0x25198950): /Data/dataset.dat: The record type [4-12]
>> found in the file is unknown.
>>
>>
>> ERROR: In /usr/local/ParaView3/VTK/IO/vtkTecplotReader.cxx, line 1714
>> vtkTecplotReader (0x25198950): /Data/dataset.dat: The record type
>> CELLCENTERED found in the file is unknown.
>>
>>
>> ERROR: In /usr/local/ParaView3/VTK/IO/vtkTecplotReader.cxx, line 1714
>> vtkTecplotReader (0x25198950): /Data/dataset.dat: The record type AUXDATA
>> found in the file is unknown.
>>
>>
>> ERROR: In /usr/local/ParaView3/VTK/IO/vtkTecplotReader.cxx, line 1714
>> vtkTecplotReader (0x25198950): /Data/dataset.dat: The record type
>> CGNS.CGNSBASE_T found in the file is unknown.
>>
>>
>> ERROR: In /usr/local/ParaView3/VTK/IO/vtkTecplotReader.cxx, line 1714
>> vtkTecplotReader (0x25198950): /Data/dataset.dat: The record type Base#1
>> found in the file is unknown.
>>
>>
>> ERROR: In /usr/local/ParaView3/VTK/IO/vtkTecplotReader.cxx, line 1714
>> vtkTecplotReader (0x25198950): /Data/dataset.dat: The record type AUXDATA
>> found in the file is unknown.
>>
>>
>> ERROR: In /usr/local/ParaView3/VTK/IO/vtkTecplotReader.cxx, line 1714
>> vtkTecplotReader (0x25198950): /Data/dataset.dat: The record type
>> CGNS.ZONE_T found in the file is unknown.
>>
>>
>> ERROR: In /usr/local/ParaView3/VTK/IO/vtkTecplotReader.cxx, line 1714
>> vtkTecplotReader (0x25198950): /Data/dataset.dat: The record type domain1
>> found in the file is unknown.
>>
>>
>> ERROR: In /usr/local/ParaView3/VTK/IO/vtkTecplotReader.cxx, line 1714
>> vtkTecplotReader (0x25198950): /Data/dataset.dat: The record type DT found
>> in the file is unknown.
>>
>>
>> ERROR: In /usr/local/ParaView3/VTK/IO/vtkTecplotReader.cxx, line 1714
>> vtkTecplotReader (0x25198950): /Data/dataset.dat: The record type DOUBLE
>> found in the file is unknown.
>>
>>
>> ERROR: In /usr/local/ParaView3/VTK/IO/vtkTecplotReader.cxx, line 1714
>> vtkTecplotReader (0x25198950): /Data/dataset.dat: The record type DOUBLE
>> found in the file is unknown.
>>
>> So it seems that the line "DATAPACKING=BLOCK" raises problem.
>> Any help?
>>
>>
>> ------------------------------
>> Gagnez au cadeau par jour avec Hotmail Magic Moment ! Cliquez ici !<http://www.hotmailmagicmoment.com/>
>>
>> _______________________________________________
>> Powered by www.kitware.com
>>
>> Visit other Kitware open-source projects at
>> http://www.kitware.com/opensource/opensource.html
>>
>> Please keep messages on-topic and check the ParaView Wiki at:
>> http://paraview.org/Wiki/ParaView
>>
>> Follow this link to subscribe/unsubscribe:
>> http://www.paraview.org/mailman/listinfo/paraview
>>
>>
>>
>>
>> --
>> Zhanping Liu, PhD
>> Kitware, Inc.
>> 28 Corporate Drive
>> Clifton Park, NY 12065-8662
>> Phone: 518-371-3971 x 138
>> http://www.zhanpingliu.org
>>
>>
>>
>>
>> --
>> Zhanping Liu, PhD
>> Kitware, Inc.
>> 28 Corporate Drive
>> Clifton Park, NY 12065-8662
>> Phone: 518-371-3971 x 138
>> http://www.zhanpingliu.org
>> ---------------------------
>> This email contains information that is private and confidential and is
>> intended only for the addressee. If you are not the intended recipient
>> please delete it and notify us immediately by e-mailing the sender.
>> Note: All email sent to or from this address may be accessed by someone
>> other than the recipient, for system management and security reasons.
>> Aircraft Research Association Ltd. Registered in England, Registration No
>> 503668 Registered Office: Manton Lane, Bedford MK41 7PF England VAT No GB
>> 196351245
>>
>>
>>
>>
>>
>>
>>
>> --
>> Zhanping Liu, PhD
>> Kitware, Inc.
>> 28 Corporate Drive
>> Clifton Park, NY 12065-8662
>> Phone: 518-371-3971 x 138
>> http://www.zhanpingliu.org
>>
>> ------------------------------
>> Gagnez au cadeau par jour avec Hotmail Magic Moment ! Cliquez ici !<http://www.hotmailmagicmoment.com/>
>>
>
>
>
> --
> Zhanping Liu, PhD
> Kitware, Inc.
> 28 Corporate Drive
> Clifton Park, NY 12065-8662
> Phone: 518-371-3971 x 138
> http://www.zhanpingliu.org
>
> _______________________________________________
> Powered by www.kitware.com
>
> Visit other Kitware open-source projects at
> http://www.kitware.com/opensource/opensource.html
>
> Please keep messages on-topic and check the ParaView Wiki at:
> http://paraview.org/Wiki/ParaView
>
> Follow this link to subscribe/unsubscribe:
> http://www.paraview.org/mailman/listinfo/paraview
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.paraview.org/pipermail/paraview/attachments/20100305/d481fedc/attachment-0001.htm>


More information about the ParaView mailing list