[Paraview] Fail to build vtkIO in 3.8.0 on Windows7 64bit MSVC2008

Dr. X xunlei at renci.org
Sun Jun 6 19:39:38 EDT 2010


Hi All,
I even disabled "CMAKE_USE_WIN32_THREADS" and used "CMAKE_USE_PTHREADS". 
That makes no difference to my problem.

best,
x

On 6/6/2010 10:01 AM, Dr. X wrote:
> Hi Alan,
> I did what you suggested. It did not mitigate the problem.
> I am wondering whether there is something in the CMake step that I 
> mis-configured. Any suggestions that I can try?
> Thanks  a lot.
>
> Best,
> x
>
> On 6/4/2010 4:26 PM, Scott, W Alan wrote:
>>
>> Not sure if this helps, but I don't have any SDK's explicitly 
>> installed at all on my machine.  I am  64 bit windows 7, using the 
>> MSVC 2008 (9.0) compiler.  I also looked in my path settings, and no 
>> SDK is to be found.  Maybe try uninstalling the SDK, be sure to 
>> remove the SDK references in your path settings (and other 
>> environment settings), cmake and recompile from scratch?
>>
>> Alan
>>
>> *From:* paraview-bounces at paraview.org 
>> [mailto:paraview-bounces at paraview.org] *On Behalf Of *Dr. X
>> *Sent:* Friday, June 04, 2010 2:16 PM
>> *To:* Dave Partyka
>> *Cc:* paraview at paraview.org
>> *Subject:* Re: [Paraview] Fail to build vtkIO in 3.8.0 on Windows7 
>> 64bit MSVC2008
>>
>> Hi Dave,
>> I tried it with both 6.0A and 7.1 SDK by running a tool coming with 
>> the SDK. But the compilation problem stays.
>>
>> Best,
>> x
>>
>> On 6/4/2010 12:52 PM, Dave Partyka wrote:
>>
>> I don't think changing the SDK that Visual Studio is using is 
>> supported. VS 2008 uses the 6.0A SDK. If you want to use the 7.1 SDK 
>> then you probably need to use VS 2010. I suspect there are 
>> configuration checks that CMake assumes if VS 2008 then use SDK 6.0A 
>> conventions.
>>
>> That said, ParaView should compile fine with Visual Stodio 2008 or 
>> 2010 using the appropriate SDK.
>>
>> On Wed, Jun 2, 2010 at 7:25 PM, Dr. X <xunlei at renci.org 
>> <mailto:xunlei at renci.org>> wrote:
>>
>> Hi All,
>> I am building ParaView 3.8.0 from source on a Windows7 64bit machine 
>> with MSVC2008 and Windows SDK7.1.
>> I ran into a lot of compilation errors regarding redefinitions in 
>> ws2def.h and WinSock2.h. Here are some of these errors in vtkIO project:
>> ---------------------
>> Error    16    error C2059: syntax error : 'constant'    C:\Program 
>> Files\Microsoft SDKs\Windows\v7.1\Include\ws2def.h    390    vtkIO
>> Error    17    error C2143: syntax error : missing ';' before '}'    
>> C:\Program Files\Microsoft SDKs\Windows\v7.1\Include\ws2def.h    
>> 443    vtkIO
>> Error    18    error C4430: missing type specifier - int assumed. 
>> Note: C++ does not support default-int    C:\Program Files\Microsoft 
>> SDKs\Windows\v7.1\Include\ws2def.h    443    vtkIO
>> Error    19    error C4430: missing type specifier - int assumed. 
>> Note: C++ does not support default-int    C:\Program Files\Microsoft 
>> SDKs\Windows\v7.1\Include\ws2def.h    443    vtkIO
>> Error    25    error C2011: 'sockaddr_in' : 'struct' type 
>> redefinition    C:\Program Files\Microsoft 
>> SDKs\Windows\v7.1\Include\ws2def.h    583    vtkIO
>> Error    26    error C2011: 'fd_set' : 'struct' type redefinition    
>> C:\Program Files\Microsoft SDKs\Windows\v7.1\Include\WinSock2.h    
>> 132    vtkIO
>> Error    28    error C2011: 'timeval' : 'struct' type redefinition    
>> C:\Program Files\Microsoft SDKs\Windows\v7.1\Include\WinSock2.h    
>> 176    vtkIO
>> Error    29    error C2011: 'hostent' : 'struct' type redefinition    
>> C:\Program Files\Microsoft SDKs\Windows\v7.1\Include\WinSock2.h    
>> 232    vtkIO
>> Error    30    error C2011: 'netent' : 'struct' type redefinition    
>> C:\Program Files\Microsoft SDKs\Windows\v7.1\Include\WinSock2.h    
>> 245    vtkIO
>> Error    31    error C2011: 'servent' : 'struct' type redefinition    
>> C:\Program Files\Microsoft SDKs\Windows\v7.1\Include\WinSock2.h    
>> 252    vtkIO
>> ---------------------
>>
>> I have made sure before every #include <windows.h> there is #include 
>> <WinSock2.h>. But that did not mitigate the problem. Can anyone help 
>> please? Thanks a lot.
>>
>> Best,
>> x
>>
>>
>> _______________________________________________
>> Powered by www.kitware.com <http://www.kitware.com>
>>
>> Visit other Kitware open-source projects at 
>> http://www.kitware.com/opensource/opensource.html
>>
>> Please keep messages on-topic and check the ParaView Wiki at: 
>> http://paraview.org/Wiki/ParaView
>>
>> Follow this link to subscribe/unsubscribe:
>> http://www.paraview.org/mailman/listinfo/paraview
>>
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.paraview.org/pipermail/paraview/attachments/20100606/6850fb02/attachment.htm>


More information about the ParaView mailing list