[Paraview] paraview-3.6.2 failed to run on OpenSUSE 11.2 64 bit
Pei-Ying Hsieh
phsieh2005 at yahoo.com
Tue Jan 5 11:36:58 EST 2010
Hi, Dave,
Yap, that did the trick! Thanks!
Pei
________________________________
From: Dave Partyka <dave.partyka at kitware.com>
To: Pei-Ying Hsieh <phsieh2005 at yahoo.com>
Sent: Tue, January 5, 2010 11:11:14 AM
Subject: Re: [Paraview] paraview-3.6.2 failed to run on OpenSUSE 11.2 64 bit
Hi Pei,
Can you try removing /home/hsieh/paraview/paraview-3.6.2-Linux-x86_64/lib/paraview-3.6/libfontconfig.so.1. If it is gone it should attempt to use your system version of libfontconfig.
On Tue, Jan 5, 2010 at 10:45 AM, Pei-Ying Hsieh <phsieh2005 at yahoo.com> wrote:
Hi, Dave,
>
>Thanks for looking into this. I will try to compile qt-4.4.3 from source to see if it resolve the issue.
>
>Outputs from gdb attached.
>
>Pei
>---------------------------------
>hsieh at saturn:~/paraview/paraview-3.6.2-Linux-x86_64> gdb ./bin/paraview
>GNU gdb (GDB) SUSE (6.8.91.20090930-2.4)
>Copyright (C) 2009 Free Software Foundation, Inc.
>License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
>This is free software: you are free to change and redistribute it.
>There is NO WARRANTY, to the extent permitted by law. Type "show copying"
>and "show warranty" for details.
>This GDB was configured as "x86_64-suse-linux".
>For bug reporting instructions, please see:
><http://www.gnu.org/software/gdb/bugs/>...
>Reading symbols from /home/hsieh/paraview/paraview-3.6.2-Linux-x86_64/bin/paraview...done.
>(gdb) run
>Starting program: /home/hsieh/paraview/paraview-3.6.2-Linux-x86_64/bin/paraview
>Missing separate debuginfo for /lib64/ld-linux-x86-64.so.2
>Try: zypper install -C "debuginfo(build-id)=591af1afa33f255704fb6a60859b93d00e205302"
>Missing separate debuginfo for /lib64/libc.so.6
>Try: zypper install -C "debuginfo(build-id)=c5a3dfd66bf61fcdec9bc22153b2fbd0d6697960"
>Executing new program: /home/hsieh/paraview/paraview-3.6.2-Linux-x86_64/lib/paraview-3.6/paraview-real
>Missing separate debuginfo for /lib64/ld-linux-x86-64.so.2
>Try: zypper install -C "debuginfo(build-id)=591af1afa33f255704fb6a60859b93d00e205302"
>Missing separate debuginfo for /home/hsieh/paraview/paraview-3.6.2-Linux-x86_64/lib/paraview-3.6/libQtAssistantClient.so.4
>Missing separate debuginfo for /home/hsieh/paraview/paraview-3.6.2-Linux-x86_64/lib/paraview-3.6/libQtGui.so.4
>Missing separate debuginfo for /usr/lib64/libSM.so.6
>Try: zypper install -C "debuginfo(build-id)=51a2a639c0e174691e5fa6f5d648d835750bc44d"
>Missing separate debuginfo for /usr/lib64/libICE.so.6
>Try: zypper install -C "debuginfo(build-id)=43a0fa4cde51095b57558eb7ed0c90dd90e99fae"
>Missing separate debuginfo for /usr/lib64/libXi.so.6
>Try: zypper install -C "debuginfo(build-id)=d278c56b4359f6a219af5e13576873a38581c25c"
>Missing separate debuginfo for /usr/lib64/libXrender.so.1
>Try: zypper install -C "debuginfo(build-id)=55f90cfa8482fae594e59cce00c20937e7257446"
>Missing separate debuginfo for /usr/lib64/libXrandr.so.2
>Try: zypper install -C "debuginfo(build-id)=6a1fccee186ebf368f2d6a7d5ccd582943fd1953"
>Missing separate debuginfo for /usr/lib64/libXcursor.so.1
>Try: zypper install -C "debuginfo(build-id)=56d901d8946aefda2e4b5e12dba24c13ac3f61a9"
>Missing separate debuginfo for /usr/lib64/libXinerama.so.1
>Try: zypper install -C "debuginfo(build-id)=c7af2457b235b84f26ce24f1c4d260ec7eeb9f88"
>Missing separate debuginfo for /usr/lib64/libXfixes.so.3
>Try: zypper install -C "debuginfo(build-id)=6495446f04c2f9a4fa3021f7322d6f12c4017305"
>Missing separate debuginfo for /home/hsieh/paraview/paraview-3.6.2-Linux-x86_64/lib/paraview-3.6/libfontconfig.so.1
>Missing separate debuginfo for /usr/lib64/libXext.so.6
>Try: zypper install -C "debuginfo(build-id)=a14cd41f23af7f31d0ac2bd8eada730888690b27"
>Missing separate debuginfo for /usr/lib64/libX11.so.6
>Try: zypper install -C "debuginfo(build-id)=5fa84adc30db95abcbaea20ed7ec1c8dd94dfff2"
>Missing separate debuginfo for /home/hsieh/paraview/paraview-3.6.2-Linux-x86_64/lib/paraview-3.6/libQtXml.so.4
>Missing separate debuginfo for /home/hsieh/paraview/paraview-3.6.2-Linux-x86_64/lib/paraview-3.6/libQtNetwork.so.4
>Missing separate debuginfo for /home/hsieh/paraview/paraview-3.6.2-Linux-x86_64/lib/paraview-3.6/libQtCore.so.4
>Missing separate debuginfo for /usr/lib64/libgthread-2.0.so.0
>Try: zypper install -C "debuginfo(build-id)=bf745d8917d27e255bf174e08e0e6775de77075b"
>Missing separate debuginfo for /usr/lib64/libglib-2.0.so.0
>Try: zypper install -C "debuginfo(build-id)=7e3842ab0a347df5f56a0697077f4eca83bfe5fe"
>Missing separate debuginfo for /lib64/librt.so.1
>Try: zypper install -C "debuginfo(build-id)=c663e79551b37d4c0c9bc93b252b917bfdedb150"
>Missing separate debuginfo for /lib64/libpthread.so.0
>Try: zypper install -C "debuginfo(build-id)=7bcbabc9da24424f1f5ef7be77b575fd3d796288"
>[Thread debugging using libthread_db enabled]
>Missing separate debuginfo for /lib64/libdl.so.2
>Try: zypper install -C "debuginfo(build-id)=44e66ebae672563bd496f290e08d316bc3bf0ac7"
>Missing separate debuginfo for /home/hsieh/paraview/paraview-3.6.2-Linux-x86_64/lib/paraview-3.6/libQtOpenGL.so.4
>Missing separate debuginfo for /usr/lib64/libGLU.so.1
>Try: zypper install -C "debuginfo(build-id)=a76155345771ffa204fc8a1cf63b3eca7ce1ae86"
>Missing separate debuginfo for /usr/lib64/libGL.so.1
>Try: zypper install -C "debuginfo(build-id)=cb5a2f35ed226cb1c92f063d03b204ec24b100a6"
>Missing separate debuginfo for /lib64/libutil.so.1
>Try: zypper install -C "debuginfo(build-id)=c215c4e3a0ed0e0e78497c3d24f0066b913c7670"
>Missing separate debuginfo for /lib64/libm.so.6
>Try: zypper install -C "debuginfo(build-id)=57fc1891d8d9f419fb8c7fc06a8285563b53a47e"
>Missing separate debuginfo for /home/hsieh/paraview/paraview-3.6.2-Linux-x86_64/lib/paraview-3.6/libQtSql.so.4
>Missing separate debuginfo for /usr/lib64/libXt.so.6
>Try: zypper install -C "debuginfo(build-id)=347ef3008674f3d1d19ccb0ec9236b5c6a51571f"
>Missing separate debuginfo for /lib64/libc.so.6
>Try: zypper install -C "debuginfo(build-id)=c5a3dfd66bf61fcdec9bc22153b2fbd0d6697960"
>Missing separate debuginfo for /lib64/libuuid.so.1
>Try: zypper install -C "debuginfo(build-id)=926afd158a155c4b03dd155013053efcaa53dba0"
>Missing separate debuginfo for /usr/lib64/libxcb.so.1
>Try: zypper install -C "debuginfo(build-id)=54a77c10d44b40080d6d8e65d277ccb7ab2a5b4a"
>Missing separate debuginfo for /lib64/libpcre.so.0
>Try: zypper install -C "debuginfo(build-id)=faf1aba9b565a29c99ce1d3944978347d6209cc3"
>Missing separate debuginfo for /usr/lib64/libXxf86vm.so.1
>Try: zypper install -C "debuginfo(build-id)=4ffef26febce96a31b2d5df10538bb6dba112e3b"
>Missing separate debuginfo for /usr/lib64/libXdamage.so.1
>Try: zypper install -C "debuginfo(build-id)=650d88fdf900daadd8ba1c9134c21b4e68b560bc"
>Missing separate debuginfo for /usr/lib64/libdrm.so.2
>Try: zypper install -C "debuginfo(build-id)=dc7d692fb4a36fa25fc513b2e36a614f5e4efc48"
>Missing separate debuginfo for /usr/lib64/libXau.so.6
>Try: zypper install -C "debuginfo(build-id)=72341bb9d8a1ad2ca2bbced007f3a785121aac28"
>Missing separate debuginfo for /usr/lib64/gconv/UTF-16.so
>Try: zypper install -C "debuginfo(build-id)=4dc9c0aff44820b7b04b954c85dc3bd1a9060b2a"
>Program received signal SIGSEGV, Segmentation fault.
>0x00007ffff548575a in FcLangSetHash () from /home/hsieh/paraview/paraview-3.6.2-Linux-x86_64/lib/paraview-3.6/libfontconfig.so.1
>(gdb) bt
>#0 0x00007ffff548575a in FcLangSetHash () from /home/hsieh/paraview/paraview-3.6.2-Linux-x86_64/lib/paraview-3.6/libfontconfig.so.1
>#1 0x00007ffff5486a10 in FcFontSetList () from /home/hsieh/paraview/paraview-3.6.2-Linux-x86_64/lib/paraview-3.6/libfontconfig.so.1
>#2 0x00007ffff54871c2 in FcFontList () from /home/hsieh/paraview/paraview-3.6.2-Linux-x86_64/lib/paraview-3.6/libfontconfig.so.1
>#3 0x00007ffff6b9b9f7 in ?? () from /home/hsieh/paraview/paraview-3.6.2-Linux-x86_64/lib/paraview-3.6/libQtGui.so.4
>#4 0x00007ffff6b9f86a in ?? () from /home/hsieh/paraview/paraview-3.6.2-Linux-x86_64/lib/paraview-3.6/libQtGui.so.4
>#5 0x00007ffff6ba3fa5 in QFontDatabase::load(QFontPrivate const*, int) () from /home/hsieh/paraview/paraview-3.6.2-Linux-x86_64/lib/paraview-3.6/libQtGui.so.4
>#6 0x00007ffff6bba74b in ?? () from /home/hsieh/paraview/paraview-3.6.2-Linux-x86_64/lib/paraview-3.6/libQtGui.so.4
>#7 0x00007ffff6bc1471 in QTextLine::layout_helper(int) () from /home/hsieh/paraview/paraview-3.6.2-Linux-x86_64/lib/paraview-3.6/libQtGui.so.4
>#8 0x00007ffff6bf2507 in ?? () from /home/hsieh/paraview/paraview-3.6.2-Linux-x86_64/lib/paraview-3.6/libQtGui.so.4
>#9 0x00007ffff6bf785c in ?? () from /home/hsieh/paraview/paraview-3.6.2-Linux-x86_64/lib/paraview-3.6/libQtGui.so.4
>#10 0x00007ffff6bf5cd3 in ?? () from /home/hsieh/paraview/paraview-3.6.2-Linux-x86_64/lib/paraview-3.6/libQtGui.so.4
>#11 0x00007ffff6bf6187 in ?? () from /home/hsieh/paraview/paraview-3.6.2-Linux-x86_64/lib/paraview-3.6/libQtGui.so.4
>#12 0x00007ffff6bf63ef in ?? () from /home/hsieh/paraview/paraview-3.6.2-Linux-x86_64/lib/paraview-3.6/libQtGui.so.4
>#13 0x00007ffff6bf649e in ?? () from /home/hsieh/paraview/paraview-3.6.2-Linux-x86_64/lib/paraview-3.6/libQtGui.so.4
>#14 0x00007ffff6bf6739 in ?? () from /home/hsieh/paraview/paraview-3.6.2-Linux-x86_64/lib/paraview-3.6/libQtGui.so.4
>#15 0x00007ffff6bf6ded in ?? () from /home/hsieh/paraview/paraview-3.6.2-Linux-x86_64/lib/paraview-3.6/libQtGui.so.4
>#16 0x00007ffff6bd0034 in QTextDocument::documentLayout() const () from /home/hsieh/paraview/paraview-3.6.2-Linux-x86_64/lib/paraview-3.6/libQtGui.so.4
>#17 0x00007ffff6bb0156 in ?? () from /home/hsieh/paraview/paraview-3.6.2-Linux-x86_64/lib/paraview-3.6/libQtGui.so.4
>#18 0x00007ffff6bb0329 in ?? () from /home/hsieh/paraview/paraview-3.6.2-Linux-x86_64/lib/paraview-3.6/libQtGui.so.4
>#19 0x00007ffff6bb4a40 in QTextControl::QTextControl(QObject*) () from /home/hsieh/paraview/paraview-3.6.2-Linux-x86_64/lib/paraview-3.6/libQtGui.so.4
>#20 0x00007ffff6d8a68e in ?? () from /home/hsieh/paraview/paraview-3.6.2-Linux-x86_64/lib/paraview-3.6/libQtGui.so.4
>#21 0x00007ffff6d8d754 in QTextEdit::QTextEdit(QWidget*) () from /home/hsieh/paraview/paraview-3.6.2-Linux-x86_64/lib/paraview-3.6/libQtGui.so.4
>#22 0x00007ffff7ebfb6c in pqConsoleWidget::pqImplementation::pqImplementation(pqConsoleWidget&) ()
>from /home/hsieh/paraview/paraview-3.6.2-Linux-x86_64/lib/paraview-3.6/libpqWidgets.so
>#23 0x00000000009b9e90 in ?? ()
>#24 0x00000000097c157f in ?? ()
>#25 0x00000000009baa70 in ?? ()
>#26 0x00007ffff7e76000 in ?? ()
>---Type <return> to continue, or q <return> to quit---
>#27 0x00000000009b9e90 in ?? ()
>#28 0x00000000005b18e0 in ?? ()
>#29 0x0000000000000001 in ?? ()
>#30 0x0000000000000000 in ?? ()
>(gdb) q
>
>
>
>
________________________________
From: Dave Partyka <dave.partyka at kitware.com>
>To: Pei-Ying Hsieh <phsieh2005 at yahoo.com>
>Sent: Tue, January 5, 2010 9:21:21 AM
>
>Subject: Re: [Paraview] paraview-3.6.2 failed to run on OpenSUSE 11.2 64 bit
>
>
>Yeah, I am thinking there is either some sort of conflict or missing library that I should package instead of using the system one. To run gdb:
>
>
>gdb ./bin/paraview
>
>
>It should print some license information and then show a gdb prompt. At the prompt type run and hit enter. It should print out a bunch of stuff and mention the segfault. At the gdb prompt type bt. Then copy and paste all of the gdb output, including anything that printed after you typed run, into an email. Let me know if it doesn't work.
>
>
>
>
>
>
>On Tue, Jan 5, 2010 at 9:08 AM, Pei-Ying Hsieh <phsieh2005 at yahoo.com> wrote:
>
>Hi, Dave,
>>
>>Thanks for the quick reply.
>>
>>I have never used gdb before. How do I start?
>>
>>I just tried the same binary of paraview-3.6.2 on an openSUSE 11.1 x64 workstation and it worked without a problem. So, is it possible I have library (QT?) missing or impatible?
>>
>>Pei
>>
>>
>>
>>
________________________________
From: Dave Partyka <dave.partyka at kitware.com>
>>To: Pei-Ying Hsieh <phsieh2005 at yahoo.com>
>>Sent: Tue, January 5, 2010 8:40:38 AM
>>
>>Subject: Re: [Paraview] paraview-3.6.2 failed to run on OpenSUSE 11.2 64 bit
>>
>>
>>I don't see anything too fishy there. Do you mind running gdb and getting a backtrace where it segfaults? I have a Suse 11.1 x64 machine here and it doesn't crash on it. If you're not a gdb expert let me know.
>>
>>
>>
>>
>>
>>On Tue, Jan 5, 2010 at 7:59 AM, Pei-Ying Hsieh <phsieh2005 at yahoo.com> wrote:
>>
>>Hi, Dave,
>>>
>>>Attached is the log file when I issued: ./bin/paraview --ldd. Thanks!
>>>Pei
>>>
>>>
>>>
>>>
________________________________
From: Dave Partyka <dave.partyka at kitware.com>
>>>To: Pei-Ying Hsieh <phsieh2005 at yahoo.com>
>>>Cc: paraview <paraview at paraview.org>
>>>Sent: Tue, January 5, 2010 7:42:15 AM
>>>Subject: Re: [Paraview] paraview-3.6.2 failed to run on OpenSUSE 11.2 64 bit
>>>
>>>
>>>Hi Pei,
>>>
>>>
>>>Can you run ./bin/paraview --ldd and send the output?
>>>
>>>
>>>Thanks!
>>>
>>>
>>>On Tue, Jan 5, 2010 at 7:30 AM, Pei-Ying Hsieh <phsieh2005 at yahoo.com> wrote:
>>>
>>>Dear paraview developers/users:
>>>>
>>>>I just downloaded the binary version of paraview-3.6.2 for linux 64. When I tried to run it, I got "segmentation fault".
>>>>
>>>>The binary version of paraview-3.6.1 runs fine.
>>>>
>>>>Any suggestion?
>>>>
>>>>Thanks!
>>>>
>>>>Pei
>>>>
>>>>_______________________________________________
>>>>Powered by www.kitware.com
>>>>
>>>>Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html
>>>>
>>>>Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView
>>>>
>>>>Follow this link to subscribe/unsubscribe:
>>>>http://www.paraview.org/mailman/listinfo/paraview
>>>>
>>>>
>>>
>>>
>>
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.paraview.org/pipermail/paraview/attachments/20100105/8a3d93f4/attachment-0001.htm>
More information about the ParaView
mailing list