[Paraview] mipspro 7.4.3

Renteria, Jose (Cont, ARL/CISD) JRenteria at arl.army.mil
Mon Sep 12 12:57:51 EDT 2005

I am running Irix 6.5.26f and looking to build a 64-bit version of ParaView with mpi. ParaView compiles but fails with the following output:

MPI: --------stack traceback-------
PC: 0xb18ca40 MPI_SGI_stacktraceback in /usr/lib64/libmpi.so
PC: 0xb18cf70 first_arriver_handler in /usr/lib64/libmpi.so
PC: 0xb18d218 slave_sig_handler in /usr/lib64/libmpi.so
PC: 0x2641dc4 sig_fixup_mask in /usr/lib64/libpthread.so
PC: 0xdaa966c _sigtramp in /usr/lib64/libc.so.1
PC: 0x128a5b42c vtkKWWidget::GetWidgetName(void) in paraview

MPI: dbx version 7.3.5 (92898_Aug07 MR) Aug  7 2003 14:15:31
MPI: Process 7497494 Thread 0x10000 (paraview) stopped at [__waitsys:24 +0x8,0xda0c8b8]
MPI:     Source (of /xlv41/6.5.26m/work/irix/lib/libc/libc_64_M4/proc/waitsys.s) not available for Process 7497494
MPI: Thread 0x10000
MPI: >  0 __waitsys(0x0, 0x7261c5, 0xffffff8380, 0x3, 0x0, 0x0, 0x64, 0x0) ["/xlv41/6.5.26m/work/irix/lib/libc/libc_64_M4/proc/waitsys.s":24, 0xda0c8b8]
MPI:    1 _waitpid(0x0, 0x1000000, 0xffffff8380, 0x3, 0x0, 0x0, 0x64, 0x0) ["/xlv41/6.5.26m/work/irix/lib/libc/libc_64_M4/proc/uwaitpid.c":47, 0xda0d964]
MPI:    2 mpi_sgi_system(0xffffff85a0, 0x7261c5, 0xffffff8380, 0x3, 0x0, 0x0, 0x64, 0x0) ["/xlv4/mpt/1.9/mpi/work/4.4/lib/libmpi/libmpi_64_M4/adi/sig.c":102, 0xb18c51c]
MPI:    3 MPI_SGI_stacktraceback(0x0, 0x7261c5, 0xffffff8380, 0x3, 0x0, 0x0, 0x64, 0x0) ["/xlv4/mpt/1.9/mpi/work/4.4/lib/libmpi/libmpi_64_M4/adi/sig.c":347, 0xb18cbb4]
MPI:    4 first_arriver_handler(0xa, 0x43b1680, 0xffffff8380, 0x3, 0x0, 0x0, 0x64, 0x0) ["/xlv4/mpt/1.9/mpi/work/4.4/lib/libmpi/libmpi_64_M4/adi/sig.c":564, 0xb18cf70]
MPI:    5 slave_sig_handler(0x0, 0x7261c5, 0xffffff8380, 0x3, 0x0, 0x0, 0x64, 0x0) ["/xlv4/mpt/1.9/mpi/work/4.4/lib/libmpi/libmpi_64_M4/adi/sig.c":664, 0xb18d220]
MPI:    6 sig_fixup_mask(0x0, 0x7261c5, 0xffffff8380, 0x3, 0x0, 0x0, 0x64, 0x0) ["/xlv41/6.5.26m/work/eoe/lib/libpthread/libpthread_64/sig.c":480, 0x2641dc4]
MPI:    7 _sigtramp(0xffffffff8000000a, 0x7261c5, 0xffffff8380, 0x3, 0x0, 0x0, 0x64, 0x0) ["/xlv41/6.5.26m/work/irix/lib/libc/libc_64_M4/signal/sigtramp.s":71, 0xdaa966c]
MPI: More (n if no)?   8 vtkKWWidget::GetWidgetName(void)(0x12d4da990, 0xffffff9330, 0x200000, 0x0, 0x12d4daaa0, 0x1, 0x34, 0x0) ["/vis/jrenteri/test_CVS/build/src/paraview-2.0.2/GUI/Widgets/vtkKWWidget.cxx":150, 0x128a5b434]
MPI:    9 <Unknown>() [< unknown >, 0x3400000128a5b0bc]

MPI: -----stack traceback ends-----
MPI: On host oyster.arl.hpc.mil, Program paraview, Rank 0, Process 7497494: Dumping core on signal SIGBUS(10) into directory /vis/jrenteri/test_CVS/InternalPkg
MPI: MPI_COMM_WORLD rank 0 has terminated without calling MPI_Finalize()
MPI: aborting job
MPI: Received signal 10

Before we upgraded to mipspro 7.4.3 I had no problem with ParaView 1.8.5 nor 2.0.2. 



-----Original Message-----
From:	Gage, Kenneth [mailto:gagekl at upmc.edu]
Sent:	Sat 9/10/2005 11:18 AM
To:	Renteria, Jose (Cont, ARL/CISD); paraview at paraview.org
Subject:	RE: [Paraview] mipspro 7.4.3
Jose -

I've been able to get previous versions to compile and run on MipsPro 7.4.3.  What compile settings are you using and what are you looking to build (64-bit, 32-bit, parallel, etc)?  Also, what error does the executable give you when you run it?

Best -

Kenneth Gage
MD-PhD Student
McGowan Institute for Regenerative Medicine
University of Pittsburgh
3025 East Carson Street
Pittsburgh, PA 15203-2155

-----Original Message-----
From: paraview-bounces+gagekl=upmc.edu at paraview.org on behalf of Renteria, Jose (Cont, ARL/CISD)
Sent: Fri 9/9/2005 12:58 PM
To: paraview at paraview.org
Subject: [Paraview] mipspro 7.4.3 

Has anyone got Paraview (any version) to work with mipspro 7.4.3.
Paraview compiles with no errors, but the executable fails.  


ParaView mailing list
ParaView at paraview.org

More information about the ParaView mailing list