[Paraview] pvbatch offscreen rendering problems

Rick Angelini rick.angelini at us.army.mil
Thu Apr 8 12:35:41 EDT 2010


The patch seems to have resolved the issue related to the DISPLAY 
variable.  Thanks!

Utkarsh Ayachit wrote:
> Looks like the patch should resolve this issue. I've committed it to
> CVS. Let me know if that doesn't work. We'll commit it to 3.8 branch
> soon.
>
> Utkarsh
>
> On Wed, Apr 7, 2010 at 2:20 PM, Utkarsh Ayachit
> <utkarsh.ayachit at kitware.com> wrote:
>   
>> Rick/ Carrie,
>>
>> My paraview is still building and will be a while before I can try
>> this out. But attached is a patch that I think will solve this issue.
>> Can you try it out?
>>
>> Thanks
>> Utkarsh
>>
>> On Wed, Apr 7, 2010 at 2:15 PM, Utkarsh Ayachit
>> <utkarsh.ayachit at kitware.com> wrote:
>>     
>>> I was writing a response when it struck me, are you building with
>>> PARAVIEW_BUILD_QT_GUI ON? That's possible the only difference between
>>> your build and mine. I am going to turn on PARAVIEW_BUILD_QT_GUI and
>>> try to reproduce the problem.
>>>
>>> Utkarsh
>>>
>>>
>>>
>>>
>>>
>>> On Wed, Apr 7, 2010 at 2:06 PM, Rick Angelini <rick.angelini at us.army.mil> wrote:
>>>       
>>>> So, we're really stumped.
>>>>
>>>> - Paraview (pvbatch) 3.6.2 works exactly as we'd expect.
>>>> - pvbatch 3.8.0/3.9.0 fail with the "can't open display" error.  If we set a
>>>> display variable, pvbatch works, but that's not really a solution.
>>>> - All three are using the same exact Mesa library and use the same CMakeInit
>>>> file during the build.  - We've also built by hand (without a CMakeInit
>>>> file) and get the same error.
>>>> - See the same display error when running pvbatch serially
>>>>
>>>> Not really sure where to turn.
>>>>
>>>> Utkarsh Ayachit wrote:
>>>>         
>>>>> That's exactly what I am doing as well ("unset DISPLAY"  that is), and
>>>>> seems to work well. Is this a debug build. Can you track down where
>>>>> the error message is coming from? I am not sure where this error
>>>>> message is coming from since it doesn't look like a paraview message
>>>>> and a quick "grep" didn't yield any result. When paraview spews a
>>>>> display error, it looks something as follows:
>>>>>
>>>>> Process id: 0 >> ERROR: In
>>>>>
>>>>> /home/utkarsh/Kitware/ParaView3/ParaView3/VTK/Rendering/vtkXOpenGLRenderWindow.cxx,
>>>>> line 542
>>>>> vtkXOpenGLRenderWindow (0x3be47e0): bad X server connection.
>>>>> DISPLAY=Process id: 0 >> ERROR: In
>>>>>
>>>>> /home/utkarsh/Kitware/ParaView3/ParaView3/VTK/Rendering/vtkXOpenGLRenderWindow.cxx,
>>>>> line 344
>>>>> vtkXOpenGLRenderWindow (0x3be47e0): bad X server connection.
>>>>> DISPLAY=p0_29057:
>>>>>
>>>>> Also make sure that OSMESA_INCLUDE_DIR, and OSMESA_LIBRARY are set
>>>>> correctly. Just for consistency sake, set the following to default
>>>>> values:
>>>>> VTK_USE_OFFSCREEN=OFF
>>>>> VTK_USE_DISPLAY=ON
>>>>>
>>>>> These need not be changed at all for using OS mesa in ParaView.
>>>>>
>>>>> Utkarsh
>>>>>
>>>>>
>>>>> On Wed, Apr 7, 2010 at 1:09 PM, Carrie E. Spear (Cont, CISD/ARL)
>>>>> <carrie.spear at arl.army.mil> wrote:
>>>>>
>>>>>           
>>>>>> Utkarsh,
>>>>>>
>>>>>> When I do an ldd pvbatch appears to be using the correct libraries GL
>>>>>> libraries (I am building agains mesa-7.0.4, could it be that my version
>>>>>> of
>>>>>> mesa is too old). I ran the following test:
>>>>>>
>>>>>> bash-3.2$ echo $DISPLAY
>>>>>> :0.0
>>>>>> bash-3.2$ unset DISPLAY
>>>>>> bash-3.2$ echo $DISPLAY
>>>>>>
>>>>>> bash-3.2$ mpirun -np 4 pvbatch --use-offscreen-rendering
>>>>>> testParallelRender.py
>>>>>> : cannot connect to X server
>>>>>>
>>>>>> --------------------------------------------------------------------------
>>>>>> mpirun has exited due to process rank 0 with PID 4770 on
>>>>>> node ls08270-l.arl.army.mil exiting without calling "finalize". This may
>>>>>> have caused other processes in the application to be
>>>>>> terminated by signals sent by mpirun (as reported here).
>>>>>>
>>>>>> --------------------------------------------------------------------------
>>>>>>
>>>>>> When I have DISPLAY set it works perfectly.
>>>>>>
>>>>>> Thanks,
>>>>>> Carrie
>>>>>>
>>>>>> Utkarsh Ayachit wrote:
>>>>>>
>>>>>>             
>>>>>>> Carrie,
>>>>>>>
>>>>>>> I just tried it with CVS ParaView and I could not reproduce it. Can
>>>>>>> you reproduce this when running on a single node? Try running ldd on
>>>>>>> pvbatch, is it getting the right OpenGL libraries?
>>>>>>>
>>>>>>> Utkarsh
>>>>>>>
>>>>>>> On Wed, Apr 7, 2010 at 9:40 AM, Utkarsh Ayachit
>>>>>>> <utkarsh.ayachit at kitware.com> wrote:
>>>>>>>
>>>>>>>
>>>>>>>               
>>>>>>>> That sounds fishy, let me take a look. I'll get back to you.
>>>>>>>>
>>>>>>>> Utkarsh
>>>>>>>>
>>>>>>>> On Wed, Apr 7, 2010 at 8:06 AM, Carrie E. Spear (Cont, CISD/ARL)
>>>>>>>> <carrie.spear at arl.army.mil> wrote:
>>>>>>>>
>>>>>>>>
>>>>>>>>                 
>>>>>>>>> Good Morning,
>>>>>>>>>
>>>>>>>>> I am currently having issues with paraview-3.8.0 and paraview-3.9.0
>>>>>>>>> when
>>>>>>>>> trying to use pvbatch and offscreen rendering. When I run with my
>>>>>>>>> DISPLAY
>>>>>>>>> variable set, I don't have any issues, when the DISPLAY variable is
>>>>>>>>> not
>>>>>>>>> set
>>>>>>>>> it fails with the "cannot connect to X server error". I have built
>>>>>>>>> paraview
>>>>>>>>> with the following flags to support the offscreen rendering
>>>>>>>>> capabilities:
>>>>>>>>>
>>>>>>>>> OPENGL_INCLUDE_DIR
>>>>>>>>> OPENGL_gl_LIBRARY
>>>>>>>>> OPENGL_glu_LIBRARY
>>>>>>>>> OPENGL_xmesa_INCLUDE_DIR
>>>>>>>>> OSMESA_INCLUDE_DIR
>>>>>>>>> OSMESA_LIBRARY
>>>>>>>>> VTK_OPENGL_HAS_OSMESA=ON
>>>>>>>>> VTK_USE_OFFSCREEN=ON
>>>>>>>>> VTK_USE_DISPLAY=OFF
>>>>>>>>>
>>>>>>>>> I have built paraview-3.6.2 with these flags and the pvbatch offscreen
>>>>>>>>> rendering works perfectly without the DISPLAY variable being set, the
>>>>>>>>> same
>>>>>>>>> does not work for 3.8.0 and 3.9.0. Am I missing a new flag for these
>>>>>>>>> packages? The mesa version I am using is 7.0.4.
>>>>>>>>>
>>>>>>>>> The pvbatch command I am running is:
>>>>>>>>> mpirun -np 4 pvbatch --use-offscreen-rendering testParallelRender.py
>>>>>>>>>
>>>>>>>>> Thanks in advance for your help,
>>>>>>>>> Carrie
>>>>>>>>>
>>>>>>>>> --
>>>>>>>>> Carrie Spear
>>>>>>>>> Software Engineer
>>>>>>>>> Lockheed Martin / Army DoD Supercomputing Resource Center
>>>>>>>>> Aberdeen Proving Ground, MD 21005
>>>>>>>>> Phone:   410-278-9976
>>>>>>>>> Email: carrie.spear at us.army.mil
>>>>>>>>>
>>>>>>>>> _______________________________________________
>>>>>>>>> Powered by www.kitware.com
>>>>>>>>>
>>>>>>>>> Visit other Kitware open-source projects at
>>>>>>>>> http://www.kitware.com/opensource/opensource.html
>>>>>>>>>
>>>>>>>>> Please keep messages on-topic and check the ParaView Wiki at:
>>>>>>>>> http://paraview.org/Wiki/ParaView
>>>>>>>>>
>>>>>>>>> Follow this link to subscribe/unsubscribe:
>>>>>>>>> http://www.paraview.org/mailman/listinfo/paraview
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>                   
>>>>>> --
>>>>>> Carrie Spear
>>>>>> Software Engineer
>>>>>> Lockheed Martin / Army DoD Supercomputing Resource Center
>>>>>> Aberdeen Proving Ground, MD 21005
>>>>>> Phone:   410-278-9976
>>>>>> Email: carrie.spear at us.army.mil
>>>>>>
>>>>>>
>>>>>>
>>>>>>             
>>>>> _______________________________________________
>>>>> Powered by www.kitware.com
>>>>>
>>>>> Visit other Kitware open-source projects at
>>>>> http://www.kitware.com/opensource/opensource.html
>>>>>
>>>>> Please keep messages on-topic and check the ParaView Wiki at:
>>>>> http://paraview.org/Wiki/ParaView
>>>>>
>>>>> Follow this link to subscribe/unsubscribe:
>>>>> http://www.paraview.org/mailman/listinfo/paraview
>>>>>
>>>>>           


More information about the ParaView mailing list